Closure Stock

Specifications:

Hindalco's closure stock is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Its strength, high formability, low earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.

Dimensions
Parameter Range Standard Tolerance

Thickness (mm)

0.18 - 0.25

0.18, 0.20

+0.005/-0.01

Width (mm)

50 - 1250

867, 762, 584

+2, -0

Length (mm)

400 — 1000

-

+2, -0

Diagonal difference for sheet (mm) 2 max - -

Coil sizes (mm)

OD: 1450 max
ID: 203, 250, 508
- -

Coil density (kg/mm)

3.5 max

- -
Offer for thickness and width outside the range may be quoted on specific request

Flatness
Less than 20 I units (typical)
For example:
:: 20 I unit means; in length of 1 meter
:: 1 wave sum of rises 5 mm, avg. rise of each wave 5.00 mm
:: 4 wave sum of rises 8 mm, avg. rise of each wave 2.00 mm
:: 6 wave sum of rises 8 mm, avg. rise of each wave 1.30 mm

Earring
Typical value: < 2 per cent for >=0.18 mm thickness

Mechanical properties

Alloy (AA) Temper UTS (mpa) % E (min)
(at 50 mm
gauge length)
Min Max

3003

H14 125 170 1

H16

165

205

1

3105

H14

150

200

1

8011 O 8.5 12 15
H14 125 170 1
H24 125 160 1

Chemical composition

Alloy (%) AA 3003 AA 3105 AA 8011

Fe

0.70

0.70

0.6 — 1.0

Si

0.60

0.60

0.5 — 0.9

Mg

0.05

0.20 — 0.80

0.05

Mn

1.00 — 1.50

0.3 — 0.8

0.20

Cu

0.05 — 0.20

0.30

0.10

Zn

0.10

0.25

0.10

Ti

0.05

0.10

0.08

Cr

0.05

0.10

0.05

Each (others)

0.05

0.05

0.05

Total (others)

0.15

0.15

0.15

Al

Remainder

Remainder

Remainder

Single number indicates maximum content

Packing

Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.

Alternatively, they are wrapped in a poly-laminated gunny or polythene, strapped with a hoop iron strap and clip and placed on a wooden pallet. Edge guards are used and the sheets are wrapped with protective thermocol sheets.

Coil: Coil is placed on wooden pallets in either eye-to-sky or eye-to-wall condition, wrapped in HDPE fabric and hardboard, and strapped with hoop iron. Silica gel packets are used for moisture protection. 

Applications :
  • Pilfer-proof caps
  • Vial seals
  • Cream containers and caps